The Sinar Agripro uses the electrical properties of water to provide an indirect method of moisture determination in coffee beans

FEATURES

Extremely easy to use

Rugged, portable design

No grinding necessary

Clear digital readout

Averaging facility

Precalibrated for 4 crops

Automatic temp compensation

Complete with carry case

SPECIFICATIONS

6095-002

Moisture range: 5% - 45% dependant upon application

Operating Temp. range: 0 - 45 deg. C

Readout resolution: 0.1% moisture

Principle of operation: Capacitance

Temperature comp: Automatic

Size: 21 x 7.5 x 7.5cm

Weight inc. carry case: 1.5Kg

Battery: 9v Alkaline

Accuracy: Better than +/-0.5%mc dependant upon application

Because there is no internal balance, these units virtually never fall out of calibration. Made with quality components and rugged design to withstand operating conditions in the field, and ensure years of trouble free service.

Quick and accurate results are obtained with no need for sample preparation. Samples must satisfy the basic criteria for capacitance based moisture analyzers

UNIFORM CHEMICAL COMPOSITON

UNIFORM PACKING DENSITY

HYGROSCOPIC PROPERTIES

No charts to read or complicated instructions, meaning virtually no operator training is required. No moving parts reduces down time for calibrations, adjustments, or repairs

Compact design is great for testing for coffee or grain moisture at remote locations. Calibrations available for several types of grains. Raw data values (Bit Values) may be used with a spreadsheet to establish moisture curves for any suitable commodity.

CAPACITANCE BASED ANALYZERS ARE GREAT FOR SPEED AND ACCURACY, BUT SHOULD BE VERIFIED BY AN ALTERNATIVE METHOD OCCASIONALLY.

THERMOGRAVIMETRIC PMC50 THIS INEXPENSIVE

(LOSS ON DRYING) ANALYZER, USES A DIRECT METHOD OF MOISTURE DETERMINATION, WHICH IS THE OFFICIAL METHOD.

HERE THE SAMPLE IS WEIGHED AND HEATED SIMULTANEOUSLY, UNTIL THE MOISTURE IS DRIVEN OFF.

THE SINAR AGRIPRO uses the electrical properties of water to provide an indirect method of moisture determination, much the same as the Sinar BeanPro, but instead of using a balance to determine the mass of the sample, has a fixed volume sample cup The screw down compression cap is used to help provide uniform density.